Sampling and analysis of airborne ammonia in workplaces of China

抄録

Objectives: With the increasing demand for the detection of occupational hazard factors in workplaces, the national standard determination method for ammonia (sampling with absorbing solution-analysis with Nessler reagent spectrophotometry) in the air of workplace presents many drawbacks during application in China. This review summarized the improvement and the alternate methods of the current sampling and analysis procedures for ammonia, aiming to provide reference to establish an appropriate method for the determination of ammonia in workplace air.

Methods: Scientific publications in English and Chinese and the standard methods of the Deutsche Forschungsgemeinschaft (DFG) in Germany, the National Institute for Occupational Safety and Health (NIOSH) and Occupational Safety and Health Administration (OSHA) in the United States, and Ministry of Health in China for airborne ammonia collection and analysis in the workplace were reviewed.

Results: The measures to improve the current sampling and analysis procedures for ammonia in China were firstly summarized. For sampling, the decrease of absorbing solution concentration and the methanesulfonic acid solution as the alternate sampling solution were suggested. For analysis, the anti-interference measures and the optimum reaction condition between ammonia and Nessler reagent were discussed. The alternate methods including sampling conducted using solid sorbent tubes and analysis performed by ion chromatography were then considered for the determination of ammonia.

Conclusions: The methods-sampling with acid-treated solid sorbent tubes and analysis with ion chromatography-were more suitable for the determination of ammonia in workplace air. However, some details about ammonia sampling and analysis still need further investigation.