2010 Volume 52 Issue 3 Pages 425-430
The present study evaluated the durability of bond strength between zirconia and 3 different resin cements. Thirty stabilized tetragonal zirconium-dioxide blocks were duplicated in dual-curing resin core build-up material specimens. Resin blocks were randomly luted to zirconium surfaces using 1) Clearfil Esthetic Cement (CLF), 2) RelyX Unicem Aplicap (RELX), or 3) Multilink Automix (MLA). After 24 h, half of the specimens from each of the 3 groups were loaded in tension until fracture (0.5 mm/min). The remaining half were tested after 6,000 thermal cycles (5 to 55°C). Data were analyzed using 2-way ANOVA and the Tukey test (α = 0.05). Fractographic analysis was performed using a stereomicroscope. Tensile bond strength values were significantly affected by the luting agent system employed and by thermal aging (P < 0.001). The highest tensile bond strength values in non-thermal-aged groups were observed for specimens from the RELX and CLF groups. In contrast, in the thermal-aged groups, the highest tensile bond strength values were for the MLA and RELX groups. Moreover, while thermocycling significantly affected bond strengths in the RELX and CLF groups, the mean strength of the MLA group did not significantly change after aging. There was little difference in the distribution of failure modes in any group. (J Oral Sci 52, 425-430, 2010)
