Abstract
A non-contact electromagnetic vibration device (NEVD) was previously developed to monitor the condition of periodontal tissues by assessing mechanical parameters. This system requires placement of an accelerometer on the target tooth, to detect vibration. Using experimental tooth models, we evaluated the performance of an NEVD system with a laser displacement sensor (LDS), which does not need an accelerometer. Simulated teeth (polyacetal rods) were submerged at various depths in simulated bone (polyurethane or polyurethane foam) containing simulated periodontal ligament (tissue conditioner). Then, mechanical parameters (resonant frequency, elastic modulus, and viscosity coefficient) were assessed using the NEVD with the following detection methods: Group 1, measurement with an accelerometer; Group 2, measurement with an LDS in the presence of the accelerometer; and Group 3, measurement with an LDS in the absence of the accelerometer. Statistical analyses were performed using nonparametric methods (n = 5) (P < 0.05). The three mechanical parameters significantly increased with increasing depth. In addition, the mechanical parameters significantly differed between the polyurethane and polyurethane foam models. Although Groups 1 and 2 did not significantly differ, most all mechanical parameters in Group 3 were significantly larger and more distinguishable than those in Groups 1 and 2. The LDS was more accurate in measuring mechanical parameters and better able to differentiate periodontal tissue conditions. (J Oral Sci 58, 93-99, 2016)
