Abstract
This article discusses the specificity of RBMK (channel type, boiling water, graphite moderated) reactors and problems of Reactor Cooling System modelling employing computer codes. The article presents, how the RELAP/SCDAPSIM code, which is originally designed for modelling of accidents in vessel type reactors, is fit to simulate the phenomena in the RBMK reactor core and RCS in case of Beyond Design Basis Accidents. For this reason, use of two RELAP/SCDAPSIM models is recommended. First model with described complete geometry of RCS is recommended for analysis of initial phase of accident. The calculations results, received using this model, are used as boundary conditions in simplified model for simulation of later phases of severe accidents. The simplified model was tested comparing results of simulation performed using RELAP5 and RELAP/SCDAPSIM codes. As the typical example of BDBA, large break LOCA in reactor cooling system with failure of emergency core cooling system was analyzed. Use of developed models allows to receive behaviour of thermal-hydraulic parameters, temperatures of core components, amount of generated hydrogen due to steam-zirconium reaction. These parameters will be used as input for other special codes, designed for analysis of processes in reactor containment.
