Abstract
Purpose: The aim of this study was to develop and apply a new method for easy intraoperative adjustment of a provisional fixed full-arch restoration, in order to allow immediate implant loading following computer-guided surgery, regardless of any implant positioning errors compared to the virtual planning.
Methods: In accordance with the NobelGuide™ protocol, a provisional restoration for immediate loading of six maxillary implants was prepared prior to surgery. Because small shifts between the planned and the actual implant positions were to be expected, the provisional restoration was not fabricated directly on temporary cylinders as a conventional one-piece superstructure, but was divided into two portions: six custom made abutments and a long span fixed restoration which were left unconnected. After implantation, the custom abutments were attached to the six implants to be immediately loaded, and the superstructure was cemented simultaneously to all abutments using dual cure resin cement. After the excess cement was cleaned and polished, the superstructure was then reseated. Passive fit was achieved between implants and the superstructure.
Conclusion: The superstructure described in this article can be easily seated and adjusted to accommodate any possible shifts in implant positioning occurring during computer-guided surgery. Through this method uneventful immediate implant loading can be achieved in a reasonable operative time.
