抄録
This paper presents an evaluation method for the fiber/matrix interfacial strength. The interfacial strength is determined by comparing experimental data with numerical simulations. The micro-droplet test is conducted, and the fiber axial stress at the point of interface debonding is obtained. A numerical simulation is performed with ABAQUS using an axisymmetric finite element model. In the numerical simulation, an accurate value of the thermal residual stress based on the thermo-viscoelasticity and the damage to the resin around the blade-contacting point are considered to simulate the experimental phenomena ideally. In the thermal residual stress analysis, the actual thermal residual stress is calculated by considering the relaxation modulus and the time-temperature superposition principle for the resin. Damage initiation criteria for both dilatational and shear cases, based on continuum damage mechanics, is considered for the resin. Interfacial debonding is simulated by using a cohesive zone model, and the interfacial strength is determined as strength of the cohesive zone element when the fiber maximum stress by simulation corresponds to the experiments.
