抄録
A vibration-type measurement system characterized by the use of an undamped dynamic vibration absorber has been developed. However, inevitable damping in the absorber may cause measurement error. A new method of measuring mass is proposed to overcome this problem. The measurement system utilizes the fixed point of a mass-spring system with a dynamic vibration absorber so that the mass is estimated regardless of damping in the absorber. A phase-looked loop (PLL) is used to achieve tuning. The principle of measurement is described on the basis of a mathematical model. A measuring apparatus was designed and fabricated, and several of its basic characteristics were studied experimentally. Damping of the primary system was found to affect fixed point formation. By reducing the damping of the primary system by a voice coil motor, the measurement conditions were achieved. The efficacy of the apparatus was studied both analytically and experimentally. The measurement conditions were realized automatically by the PLL. Mass measurement was performed while the PLL was operated; the average measurement error was within 0.21 [%].
