電気加工学会誌
Online ISSN : 1881-0888
Print ISSN : 0387-754X
ISSN-L : 0387-754X
研究
電解液ジェット加工におけるアシストガスの効果に関する研究
甲斐 奨也国枝 正典
著者情報
ジャーナル フリー

2013 年 47 巻 115 号 p. 97-103

詳細
抄録

 In electrolyte jet machining, by using a film flow formed after an electrolyte jet collides with a workpiece, the workpiece can be machined locally in the area of collision with the electrolyte jet by applying an electric current to the region. However, when the electrolyte flow rate is low, a hydraulic jump occurs near the jet and the film flow cannot be formed, thereby the workpiece cannot be machined locally. To solve this problem, we introduced an assist air jet coaxial to the electrolyte jet. The effect of the assist air jet on accelerating the radial flow of the electrolyte was clarified by hydrodynamic simulation. Machining experiments showed that the assist air jet has beneficial effects on machining stability at lower electrolyte flow rates, enabling higher aspect ratios in hole drilling and fabrication on concave surfaces.

著者関連情報
© 2013 一般社団法人 電気加工学会
前の記事
feedback
Top