1971 年 14 巻 72 号 p. 564-571
In this paper the frictional pressure drop, void fraction and flow pattern of an air-water two-phase flow in helically coiled tubes are presented. The coils are constructed of 9.92 mm I.D. copper tube and the ratios of inside diameter to coil diameter are 1/11 and 1/22.7, and the lengths are 4 m and 4.5 m respectively. The experiments were conducted in the range of superficial water velocity wlo: 0.35∼1.16 m/sec and superficial air velocity wgo: 0∼5 m/sec. The frictional pressure drop of the two-phase flow in these coils is 1.1 to 1.5 times as much as that in a straight tube in the range of the experiment. Three types of empirical equations for the frictional pressure drop are proposed, and also the experimental data are correlated by a modified Lockhart-Martinelli method. The values of void fraction in the coils are approximately equal to those in a straight tube for the same water and air flow rates.
JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing
JSME International Journal Series B Fluids and Thermal Engineering
JSME International Journal Series A Solid Mechanics and Material Engineering
JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing
JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry
JSME international journal. Ser. A, Mechanics and material engineering
JSME international journal. Ser. 1, Solid mechanics, strength of materials