1972 年 15 巻 90 号 p. 1625-1631
In the previous paper, the wear tests were carried out in the lubricating oil containing hard abrasive particles, and an equation was derived considering the wear being a phenomenon of plastic fatigue due to rolling contacts of particles. In the present paper, wear tests of some metals are carried out varying the diameter of SiC particles and the contact pressure, and their effects on hardness and roughness of the worn surface and on diameter of wear fragments are studied. The wear rate equation is modified rationally. However, exceptions are observed with very small particles between the mating surfaces and also under the pressure over a fixed value of materials, and the reasons are explained.
JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing
JSME International Journal Series B Fluids and Thermal Engineering
JSME International Journal Series A Solid Mechanics and Material Engineering
JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing
JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry
JSME international journal. Ser. A, Mechanics and material engineering
JSME international journal. Ser. 1, Solid mechanics, strength of materials