1975 年 18 巻 118 号 p. 405-410
A precise determination of both superheats at boiling incipience and boiling heat transfer of liquid metals is required for practical engineering problems. From this point of view, numerous experiments on boiling heat transfer in liquid metals have been reported since more than ten years ago. There exists, however, a large scatter among these experimental data. The main purpose of this experiment is to try to find a dominant factor by which so large a scatter is caused. The heating surface used in this experiment was machined only by a lathe, considering a practical use. Superheats at boiling incipience and boiling heat transfer coefficient were measured in the pressure range from 0.01 kg/cm2 up to 2.0 kg/cm2, and the discussion especially on the effect of dissolved gas was presented.
JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing
JSME International Journal Series B Fluids and Thermal Engineering
JSME International Journal Series A Solid Mechanics and Material Engineering
JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing
JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry
JSME international journal. Ser. A, Mechanics and material engineering
JSME international journal. Ser. 1, Solid mechanics, strength of materials