Studies on the Scoring by Using a Crossed Cylinders Friction Machine : 1st Report, On the Initial Situation of Scoring
1979 年 22 巻 164 号 p. 218-225
詳細
1979 年 22 巻 164 号 p. 218-225
By using a crossed cylinder friction machine, the rolling-sliding friction tests under a lubricating condition were carried out, and the scoring marks which had been induced by single friction were studied. Then the initial situation of scoring can be decided by using a drawing method from the scoring marks on upper and lower cylindrical specimens. The features of scoring marks on the normalized steel, the hardened and tempered steel and the surface-hardened steel were also clarified by the observation with a microscope. And then the surface flash temperature at the initial situation of scoring was investigated on the basis of calculating results of frictional surface temperature in the elliptical contact area.
JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing
JSME International Journal Series B Fluids and Thermal Engineering
JSME International Journal Series A Solid Mechanics and Material Engineering
JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing
JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry
JSME international journal. Ser. A, Mechanics and material engineering
JSME international journal. Ser. 1, Solid mechanics, strength of materials
