1983 年 26 巻 221 号 p. 2017-2021
Indentation of sintered metals with square-based pyramids is performed and the relationship between the hardness and the compressive flow stress of the sintered metals in obtained. When the semi-angle α of the pyramid is 68°, which corresponds to the semi-angle of a Vickers hardness indenter, the ratio of the hardness to the flow stress is dependent upon the relative density. However, when α is 45°, the ratio is a constant value of 2.7 without influence of the relative density. Therefore, the flow stress of the sintered metals can be estimated from the hardness measured by using the indenter with the semi-angle of 45°.
JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing
JSME International Journal Series B Fluids and Thermal Engineering
JSME International Journal Series A Solid Mechanics and Material Engineering
JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing
JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry
JSME international journal. Ser. A, Mechanics and material engineering
JSME international journal. Ser. 1, Solid mechanics, strength of materials
