1985 年 28 巻 242 号 p. 1782-1788
The influences of the bearing type and the mounting method of the V pulley on the frequency response of a lathe spindle supported by rolling bearings were experimentally investigated, changing the bearing-preload. Also, the magnitude of the maximum negative real part of the receptance was investigated. Based upon the experimental results, it was found that the damping properties of the work-spindle system are largely affected by the type of the main bearing and the mounting method of the pulley. Particularly, the double-row parallel roller bearing is superior to the tapered roller bearing in the first mode of vibration, but inferior to it in the second and third modes. The damping capacity of the spindle is improved by mounting a floating type V pulley on the rear side of the main spindle
JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing
JSME International Journal Series B Fluids and Thermal Engineering
JSME International Journal Series A Solid Mechanics and Material Engineering
JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing
JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry
JSME international journal. Ser. A, Mechanics and material engineering
JSME international journal. Ser. 1, Solid mechanics, strength of materials