1992 年 35 巻 4 号 p. 379-385
The elastic problem of thick-walled tubes of a functionally graded material(FGM) under internal pressure in the case of plane strain (εz=0) has been studied. The model components of the FGM are based on the combination of a matrix with three kinds of elastic moduli of 35, 70, and 210 GPa, and a particle with an elastic modulus of 360 GPa. The distribution profile is assumed by the expressions reported previously for a corundum/ plaster FGM. The elastic stress and strain distributions for the FGM became complicated because of radial elastic modulus gradations. The effects of distribution profiles on the deformation can be summarized by considering the variation of the normalized elastic modulus rate [(dE/dr)/E] in the radial direction. If a greater positive normalized elastic modulus rate is obtained, the circumferential stress at an inner plane of a tube is decreased, and then the tube begins to function as a compound tube.
JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing
JSME International Journal Series B Fluids and Thermal Engineering
JSME International Journal Series A Solid Mechanics and Material Engineering
JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing
JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry
JSME international journal. Ser. A, Mechanics and material engineering
