The Proceedings of the Asian Symposium on Materials and Processing
Online ISSN : 2424-2853
2006
Session ID : B-10
Conference information
B-10 Fabrication of Textured (Bi,Pb)_2Sr_2Ca_2Cu_3O_<10+X>/Ag Thick Films by Electrophoretic Deposition Method(Session: Thin films)
M.A.C. SottoR.V. Rivera-VirtudazoR.V. Sarmago
Author information
CONFERENCE PROCEEDINGS FREE ACCESS

Details
Abstract
Pure and Pb-doped (Pb=0.3) Bi_2Sr_2Ca_2Cu_3O_<10+x> (Bi-2223) thick films (〜5-30 μm) were electrophoretically deposited on high purity silver foil using ethanol as the suspending liquid. The deposition was done at applied voltage of 400 V/cm and current of 〜0.02 mA/cm^2 for a period of 10 minutes. Short sintering time of 1 hour at 820℃ was performed to reduce film porosity and allow vacancy diffusion of the deposited grains. X-ray diffraction and surface image analysis of the film shows c-axis orientation and excellent grain alignment, respectively. These results indicate texturing of the deposited films.
Content from these authors
© 2006 The Japan Society of Mechanical Engineers
Previous article Next article
feedback
Top