The Proceedings of the Dynamics & Design Conference
Online ISSN : 2424-2993
2018
Session ID : 617
Conference information

Continuous driving of accelerometer by vibration power generation using parallel-type laminated piezoelectric elements
*Akihiro MOROHOSHIShigeru FUJIMOTOMasaaki ICHIKIOjima sho
Author information
CONFERENCE PROCEEDINGS FREE ACCESS

Details
Abstract

The necessity for the development of micro power supply technologies for mobile phones and portable electronics has increased in recent years. Methods of self power generation using the vibration loads of structures have attracted attention as the power supply technologies. In this study, we focused on lead zirconate titanate (Pb(Zr,Ti)O3, PZT) as the generating piezoelectric element. The purpose of the study is to develop a high- efficiency PZT generator element that utilizes the vibration loads in the support members of a structure. However, piezoelectric elements only generate power in the order of several microwatts, so improving their power generation capacity is of the utmost importance. In this paper, experiments of driving the accelerometer for continuously driving using the laminated PZT elements are reported. The accelerometer module device was composed of capacitor, switching circuit, voltage sensor and accelerometer module. The charges generated from the laminated PZT element are charged by the capacitor. And it reaches to the Accelerometer module through the switching circuit. As a result, it is possible to obtain the acceleration information. Based on these results, we confirmed the continuous acceleration sensor.

Content from these authors
© 2018 The Japan Society of Mechanical Engineers
Previous article Next article
feedback
Top