抄録
MELCOR contains a coupling interface based on the MPI-Standard, which enables the communication to other codes such as RELAP5 or GASFLOW. However a detailed knowledge of this coupling interface in MELCOR is necessary to use this possibility. Therefore, at the KIT the software tool DINAMO (Direct Interface for Adding Models) has been developed. This program contains the coupling routines as well as an interface to communicate with other programs. Using DINAMO it is also possible to utilize new or enhanced models for phenomena, which occur during a severe accident in a nuclear power plant, in MELCOR without modification of the MELCOR source code. In the present work MELCOR calculations of experiments in the LIVE-Facility are presented. The LIVE-Facility is used to simulate the behavior of a melt in the lower plenum of a reactor pressure vessel (RPV). For these calculations we coupled MELCOR via DINAMO with the Phase-Change Effective Convectivity Model (PECM), which has been developed at the KTH in Stockholm. Using the PECM it is possible to improve the prediction of a core melt in the lower plenum of a RPV in case of a core melt accident.
