Proceedings of the International Conference on Power Engineering : ICOPE
Online ISSN : 2424-2942
セッションID: D203
会議情報
D203 MODELING AND OPTIMIZING PARAMETERS IN THE PROCESS OF TAR REMOVAL IN BIOMASS GASIFICATION BY CATALYTIC CRACKING(Biomass-4)
Pu HANDa-zhong LIHui WANG
著者情報
会議録・要旨集 フリー

詳細
抄録
The tar produced in the biomass gasification process had a bad effect on the whole gasification process flow. If the tar can be transformed into combustible gas before condensation, the gasification efficiency would be improved and the tar content would be decreased. This thesis built a tar catalytic cracking and removal process model of biomass rice straw pyrogenation and gasification by based on the analysis of factors influencing the tar catalytic cracking rate, and least squares support vector machine, and conducted the validation. On this basis, this thesis did an optimized calculation upon the parameters of the tar removal process. The results proved that this model had good generalization ability, fitting effect, and can simulate the characteristics of biomass rice straw catalytic `cracking process, and when the catalytic cracking temperature reached 937.0101℃ and the gas residence time was 0.9041 s, the maximum of the tar catalytic cracking rate can be 95.4418%.
著者関連情報
© 2009 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top