抄録
In recent years, a printed electronics technology attracts attention as a manufacturing technology of a flexible device. However, while mass production of flexible devices is required, it is difficult to do. Therefore, in order to improve mass productivity, introduction into the Roll to Roll system is being studied. However, there are many problems in both the Printed Electronics technology and the Roll to Roll manufacturing method now. Therefore, we attempted making to fabricate a flexible pressure sensor by printing and firing a piezoelectric element or a conductive ink using an inkjet apparatus or a gravure printing apparatus. Subsequently, the voltage was measured by applying pressure to the created pressure sensor. In addition, printing was performed while a printing apparatus was attached to a roll-to-roll apparatus and a film was conveyed, and printing accuracy was measured.
