The Proceedings of the JSME international conference on motion and power transmissions
Online ISSN : 2424-3043
セッションID: GDS-04
会議情報
GDS-04 Measurement of Contact Stress on Tooth Flank of Spur Gear Subject to Static Load : Comparison of analysis with Tooth Flank Film Element(DESIGN AND SYNTHESIS OF A PAIR OF GEARS OR OF GEAR TRAINS)
Ichiro MORIWAKITatsuya HASHIMOTONatsuki HIRATAMorimasa NAKAMURAAkio UEDA
著者情報
会議録・要旨集 認証あり

詳細
抄録
Contact stress between meshing gear tooth flanks is one of the most important factors for the load capacity evaluation of a gear pair. A gear design system was developed using Tooth Flank Film Elements (TFFEs). The TFFEs enable boundary conditions for a contact problem in meshing teeth to be easily dealt with. In order to confirm the reliability of the gear design system, contact stresses between meshing gear flanks of spur gear pair subject to a static load were measured using pressure measurement film, and were compared with calculated ones. In the present paper, contact stresses of a gear pair with some parallel and crossed misalignments were measured, and were com-pared with calculated ones. As a result, even for a gear pair with some parallel misalignments, the Tooth Flank Film Elements can work well, and can yield reasonable contact stresses.
著者関連情報
© 2009 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top