年次大会
Online ISSN : 2424-2667
ISSN-L : 2424-2667
セッションID: G0400104
会議情報
G0400104 SUS304薄板の多段V曲げ加工におけるフィードバック制御を用いた曲げ角の高精度化
大津 雅亮三宅 寛輝堀 欣典村中 貴幸岡田 将人
著者情報
会議録・要旨集 フリー

詳細
抄録
To improve efficiency of fuel consumption in automotive industry, high tensile strength steels become to be used for automotive body parts. High strength sheets, however, induce large springback in press working, and a variation in bending angle becomes also large as the bending angle and springback increase. To reduce the variation in bending high strength sheets, a servo press was employed and carried out two-stage V bending. SUS304 stainless steel sheets with a thickness of 1 mm was used for specimen. The objective bending angle was set to 90 degrees. From the experimental results, the bending angle in the first stage bending for obtaining minimum variation was 80 degrees. The bending angle in the second stage bending could be predicted from the results of the bending angle in the first stage bending and the stroke was adjusted to get the objective angle. This feedback control enabled to reduce the variation of the bending angle.
著者関連情報
© 2015 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top