The Proceedings of Mechanical Engineering Congress, Japan
Online ISSN : 2424-2667
ISSN-L : 2424-2667
[volume title in Japanese]
Session ID : J0210102
Conference information

Visualization of Thrombus Formation on Shear Flows in Paravalvular Leak Model and related Analysis
*Shoji YAMAGUCHIYuji SANJOMasaaki TAMAGAWA
Author information
CONFERENCE PROCEEDINGS FREE ACCESS

Details
Abstract

TAVI (Transcatheter Aortic Valve Implantation) is a minimally invasive treatment for Aortic Stenosis. Although when PVL (Paravalvular Leaks) occurred after surgery, life prognosis worsens. In this research, we made a PVL model with clearance around the orifice and compare visualization of thrombus formation on PVL flow visualized by optical system and flow field is also analyzed by CFD. Experimental result showed that PVL model thrombus formation depend on the clearance size. That is, thrombus formation in large leak model start around the leakage, whereas thrombus formation in small leak model start around the orifice. According to the CFD result, it was found that vortex and contraction existed in the flow field. It turned out that the vortex became smaller as the leakage became larger, but the contraction flow became larger as the leakage increased. Next, the difference in thrombus formation rate (Rs) near the wall compared with the clearance size. As a result, it was found that the leakage is large, the Rs increase. It was suggested that small wake by large leakage flow affected thrombus formation.

Content from these authors
© 2018 The Japan Society of Mechanical Engineers
Previous article Next article
feedback
Top