The Proceedings of Mechanical Engineering Congress, Japan
Online ISSN : 2424-2667
ISSN-L : 2424-2667
2021
Session ID : S081-03
Conference information

Vibration Test for Oval Vibration Mode of a Horizontal Cylindrical Tank
Hiroyuki YAKA*Kohei SUSUKIDAYusuke AOKIMotoki NAKANEMasaki TSURUKI
Author information
CONFERENCE PROCEEDINGS RESTRICTED ACCESS

Details
Abstract

The purpose of this study is to confirm the damage progression of a horizontal cylindrical tank until leakage caused by deformation due to the oval vibration mode under a seismic condition. For this purpose, an excitation experiment was conducted on a model of a tank filled with water. The model was made of aluminum alloy with a diameter / thickness ratio of 600. When the tank was at a water depth of 50 %, local plastic deformation occurred because of the excitation, and the shape was deformed due to the oval vibration mode, but no leakage occurred. At a water depth of 90 %, a crack initiated, and the leakage of water was observed. In the tank model applied to this experiment at a water depth of 90 %, it is suggested that the oval vibration mode causes local yielding in the tank body, and that water leakage occurs.

Content from these authors
© 2021 The Japan Society of Mechanical Engineers
Previous article Next article
feedback
Top