抄録
Powder particles of polystyrene coated with nickel-phosphorus alloy layers using electroless plating were pressed into pellets by isostatic pressing and sintered in vacuum at high temperature. A metallic closed cellular material was then fabricated. The compressive and damping tests of this metallic closed cellular material were performed. The obtained results show that this material has the different stress-strain curves among the specimens that have different thickness of the cell walls, and this closed cellular material has a long plateau region in the curves and high energy absorption. In addition, Young's modulus and compressive strength of this material depend on the thickness of the cell walls. The loss factor of this material also depends on the sintering temperature.
