年次大会講演論文集
Online ISSN : 2433-1325
セッションID: 2329
会議情報
2329 マグネシウム合金セミソリッド鋳造法による薄板の作製(S30 半溶融・半凝固加工の最先端)
城戸 太司茂木 徹一
著者情報
会議録・要旨集 フリー

詳細
抄録
AZ31 magnesium alloy slurry was cast into the twin roll castor to make casting sheets. The magnesium slurry was obtained by using an inclined cooling plate. The cooling plate plays an important role of nucleation of primary magnesium crystals on the cooling plate. The sheets obtained were 2 or 3mm thick, 100mm wide and 2m long. The surface is smooth and distribution of granular magnesium crystals were distributed homogeneously. The sheets were possible to roll until reduction rate was 20% at room temperature.
著者関連情報
© 2005 一般社団法人日本機械学会
前の記事 次の記事
feedback
Top