年次大会講演論文集
Online ISSN : 2433-1325
セッションID: K-1108
会議情報
K-1108 中空流路を有する三杯形風車の開発に関する研究(S18-2 圧縮機・タービン)(S18 流体機械に関する諸問題)
中瀬 敬之西 泰行中島 俊介松本 鉄太郎
著者情報
会議録・要旨集 フリー

詳細
抄録
This paper describes a development of three buckets wind turbine with through ways. We used six kinds of wind turbines (three type and two depth). We carried out an examination of a capacity to change wind velocity and a shaft resist. We achieved about 12% of power coefficient and 60% of torque coefficient. This wind turbine can resist over 40m/s wind. Therefore, this wind turbine was expected to be use for an anemometer in an area of strong wind and an elevation of the rate of operation, because usual propeller can be use only above 3.5m/s wind and under 22.5m/s wind and that rate of operation is on more than 20%.
著者関連情報
© 2001 一般社団法人日本機械学会
前の記事 次の記事
feedback
Top