機械材料・材料加工技術講演会講演論文集
Online ISSN : 2424-287X
会議情報
115 優れたき裂治癒能力と耐熱限界を有するアルミナセラミックスの開発
安藤 柱金 炳守児玉 晋高橋 宏治斉藤 慎二
著者情報
会議録・要旨集 フリー

p. 75-76

詳細
抄録
Al_2O_3/SiC composite ceramics was sintered by hot pressing. Three point bend tests were conducted according to JIS standard. Semi-elliptical surface crack of 40-350μm in diameter was made on the specimen. Four kinds of specimens (as-received, heal treated, pre-cracked and heal treated cracked), crack healing behavior and high temperature strength were tested systematically. The main conclusions were obtained as follows : (a) Al_2O_3/SiC composite ceramic has ability to heal crack. (b) Pre-cracked Al_2O_3/SiC composite ceramic to be healed completely at 1273K, 1473K and 1573K, for 300h, 10h and 1h, in air each other. (c) The maximum crack size to be healed is semi-elliptical crack of about 300μm in diameter. (d) Crack healed part has approximately the same strength of smooth specimen up to 1373K and most specimen failed outside the pre-cracked zone.
著者関連情報
© 2003 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top