生産システム部門講演会講演論文集
Online ISSN : 2424-3108
会議情報
116 3Dプリンタ成形品から転写したシリコーンゴム型によるCFRPコイルスプリングの作製(アディティブ・マニュファクチャリングの生産システム)
木村 南マンボ ベルビル ポール
著者情報
会議録・要旨集 フリー

p. 101-102

詳細
抄録
In this paper, CF (carbon Fiber) and an Epoxy matrix are used to make a very strong non-corrosive light weight CFRP Coil spring. The CF-Epoxy coil spring is produced by Winding CF cloth/strands on a silicone mold transcribed/produced from a 3D printed ABS coil mold. CF-Epoxy coil spring is subjected to a series of experiments to determine the mechanical properties
著者関連情報
© 2015 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top