熱工学コンファレンス講演論文集
Online ISSN : 2424-290X
セッションID: E231
会議情報
SThMによる局所熱伝導率計測法に関する研究(オーガナイズドセッション5 熱物性とその計測法)
中別府 修, 磨田 謙一
著者情報
会議録・要旨集 フリー

詳細
抄録
Local thermal conductivity measurement method on the Scanning Thermal Microscope (SThM) has been studied experimentally. Since quantitative measurement of the conductivity requires thermal conductance and another information related to contact area, our new method uses heat flow and contact temperature between a heated cantilever and a sample. The micro thermal cantilever including heater, thermocouple, thermopile and electrode for contact thermocouple was developed. The sample was coated with gold thin film as another electrode for the contact thermocouple. The experiment in the force curve mode operation shows that the heat flow increases and the contact temperature decreases as a contact load increases, and vice versa. Although measured ratio of the conductivity between gold and glass samples were much smaller than the theoretical value, the new method detects difference in the local thermal conductivity.
著者関連情報
© 2004 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top