熱工学コンファレンス講演論文集
Online ISSN : 2424-290X
セッションID: B224
会議情報
B224 ナノスケール機械修飾表面の壁面ゼータ電位への影響(OS-6: マイクロ・ナノ熱工学(6))
田部井 佑, 実川 大海, 吉川 竣, 水本 由達, Born Jakob, 柿沼 康弘, 佐藤 洋平
著者情報
会議録・要旨集 フリー

詳細
抄録
The effect of the wall surface roughness on the zeta potential in a microchannel flow was investigated by micron-resolution particle image velocimetry combined with a confocal scanner (hereinafter called confocal micro-PIV). The nanoscale wall surface roughness of microchannel was modified by a cryogenic micromachining system that enables the formation of grooves in elastic materials such as polymers by applying cryogenic cooling. polymers change from a rubbery state to a glassy state below the glass transition temperature; for polydimethylsiloxane (PDMS), this transition occurs at -123 degrees centigrade. Prior to a set of experiments, the electrophoretic velocity of 1 micron diameter fluorescent particles at different pH was measured by current monitoring. The particle mobility near the PDMS wall at different wall roughness was measured by confocal micro-PIV. The electroosmotic velocity was calculated subtracting electrophoretic velocity from particle velocity. Finally the zata potential was obtained by the Helmholtz-Smoluchowski equation.
著者関連情報
© 2012 一般社団法人 日本機械学会
前の記事 次の記事
feedback
Top