主催: 一般社団法人 日本機械学会
会議名: 熱工学コンファレンス2019
開催日: 2019/10/12 - 2019/10/13
We investigated prediction accuracy of an identification method using sensitivity analysis of CFD software developed by us named as “FlowDesigner”. We applied the identification method to predict the thermal conductivity of TIM with 0.1mm thickness set in between upper and lower base plates by using the measured temperature of targets located in the center of both upper and lower base plates. We clarified that the thermal conductivity of TIM was able to be predicted as 0.2W/m·K within prediction error band of ±10% under the condition of targets temperature measurement error was in between -1 and +0.8 K and heat flow ratio of in-plain direction against thickness direction was in between -1 and +0.8.