材料力学部門講演会講演論文集
Online ISSN : 2433-1287
セッションID: 310
会議情報
310 Ti-6Al-4V合金の高サイクル疲労特性と応力比の相関(OS1-2 高強度材の超高サイクル疲労(2))(OS1 高強度材・表面改質材の疲労と破壊)
小熊 博幸中村 孝杉野 淳一野口 徹
著者情報
会議録・要旨集 フリー

詳細
抄録
To investigate the interrelation between high-cycle fatigue behavior and stress ratio (R=σ_<min>/σ_<max>), uniaxial fatigue tests were carried out under two different stress ratios, R=-1 and -0.5. The results are as follows: (1)The difference of stress ratios had a great influence on mechanism of interior fracture. (2)When stress ratios were negative, softening type fracture sometimes occurred. (3)Stress ratios had significant effect on aspects of fracture surface. (4)It is inappropriate and risky to apply modified Goodman diagram to the evaluation of a long fatigue life where interior fractures occur.
著者関連情報
© 2001 一般社団法人日本機械学会
前の記事 次の記事
feedback
Top