SUS304鋼の973K大気中引張圧縮－繰返しねじりCC試験寿命に及ぼす非比例負荷の影響について

抄録

This paper investigates the applicability of the procedure proposed by one of the authors for estimating the nonproportional loading effect on PP test lives to the estimation of the creep-fatigue lives of SUS304 austenitic stainless steel subjected to nonproportionally combined push-pull and cyclic torsion under CC type strain waveform. Fully reversed strain-controlled CC tests were conducted on thin-walled tubular specimens of SUS304 steel at 973K in air under in-phase and 90deg out-of-phase straining conditions. The partitioned inelastic strain range versus life equations, Δε_cc versus N_cc relationships, obtained from three different proportional loading conditions, such as push-pull, cyclic torsion, and in-phase combined push-pull and cyclic torsion, are found to be correlated with one another by the multiaxiality factor. By using the multiaxiality modified Δε_pp versus N_pp and Δε_cc versus N_cc relationships, the 90deg out-of-phase straining CC test lives were estimated by the proposed procedure, where the strain range partitioning was done by superposing the hysteresis loops of PP tests on those of CC tests. As the results, the estimated lives are found to agree well with the experimental lives in adopting the superposition method rather than the rapid loading method.