材料
Online ISSN : 1880-7488
Print ISSN : 0514-5163
ISSN-L : 0514-5163
ガスケット係数について(第2報)
遠藤 外雄, 阿波屋 義照
著者情報
ジャーナル フリー

1964 年 13 巻 127 号 p. 256-263

詳細
抄録
In the previous paper of the authors, experimental and analytical studies were made on the influencing factors in asbestos-joint sheet gasket affecting the tightening characteristics under the pressure of internal fluid up to 20Kg/cm2. In the present paper, the authors propose an empirical formula regarding the relation between the gasket factor and leak pressure. And the authors made further analytical discussions in the paper about the condition in which the internal diameter of gasket was of constant quantity in the influencing factors and the width and thickness were of variable quantity, and the internal fluids applied were water and machine oil.
In the present paper, experimental and analytical studies were made under the condition in which all the width and the internal diameter are of variable quantities and the internal pressure applied ranges between 1 to 60Kg/cm2. The specimens tested in our experiments are asbestos-joint sheet, synthetic rubber and vinyle chloride gaskets.
著者関連情報
© 日本材料学会

この記事はクリエイティブ・コモンズ [表示 - 非営利 - 改変禁止 4.0 国際]ライセンスの下に提供されています。
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
前の記事 次の記事
feedback
Top