材料
Online ISSN : 1880-7488
Print ISSN : 0514-5163
ISSN-L : 0514-5163
ベリリウム押出し材の高温強度に関する研究
佐藤 千之助奥 達雄相沢 作衛薄井 洸
著者情報
ジャーナル フリー

1967 年 16 巻 162 号 p. 203-209

詳細
抄録

The hot extruded beryllium of reactor grade purity was studied at elevated temperatures with respect to its tensile, hardness, elastic modulus and creep properties. The thus obtained results have been discussed in comparison with out previous report regarding hot rolled beryllium.
The hardness was regarded as a macroscopic measure for the temperature dependencies of critical slip mechanisms in single crystal.
The elastic modulus up to 1000°C were determined by means of an ultrasonic pulse propagation speed.
The creep tests were carried out in two ways, namely the stress increment method at constant temperatures among the room temperature to 700°C and the temperature cycling method of the triangular temperature variation between 350 and 600°C at constant loads. In the stress increment creep, the steady creep rate and the rupture life in the Larson-Miller diagrams agree reasonably with the corresponding data at The Brush Beryllium Co. by ordinary method. The relation of steady creep rate ε and the cycles-to-rupture NR in the temperature cycling creep was expressed as εNR0.70=constant. This equation is similar to the formura on strain controlled fatigue. The considerations in the temperature cycling creep of this material have been discussed in comparison with constant temperature creep.

著者関連情報
© 日本材料学会
前の記事
feedback
Top