オーステナイト系ステンレス鋼SUS304の高温大気中および高温純水中の疲労強度に及ぼす表面処理の影響

抄録

Effect of preliminary surface working on the fatigue strength of type 304 stainless steel in air and pure water both at 288°C was examined. The surface finishings were electropolishing, emery paper polishing, shot peening, shot peening followed by emery paper polishing, and glassbead peening. While the residual stress introduced by shot peening was very highly compressive, the fatigue strength was not so much increased. However, the fatigue strength of the shot peened and then emery paper polished stainless steel was remarkably increased. The fatigue strength of the glassbead steel in air was much more improved compared with the shot peened stainless steel. The fatigue strength of the glassbead peened steel was also increased in high temperature water, but the degree of improvement was not so high compared with that in air.