ブナ材の部分着色におけるチロース生成を原因とする着色むらの抑制

抄録

For the development of the partial coloring technique using Japanese beech (Fagus crenata), it is necessary to clarify the methods for prevention of tylose development.
Three logs felled in midsummer were immediately immersed in a hot bath at temperatures of 20°C, 40°C, 50°C, 60°C. Another three logs felled in midwinter were each cut into 4 sections then treated in the following conditions; outdoors under snow, a stockroom well-ventilated within -30.9°C-11.3°C, a thermostatic room at 4°C, a stock room well-ventilated within 1°C-18°C for 90 days, and a half of each section was immediately immersed in a hot bath at a temperature of 50°C. Then, they were each penetrated with a dye solution by the capillary rise method for four hours.
Results obtained were as follows;
1. The wood felled in summer and treated in hot baths of 50°C and 60°C absorbed a dye solution very well. And as the dye solution penetrated into the wood deeply through the vessels of earlywood, color contrast between the earlywood and the latewood was emphasized clearly.
2. Wood felled in winter needs to be sawed and dried within a low temperature period. Or the wood needs to be heated above 50°C before drying.