Control of Short-Wave Length Irregularity of Slivers
Shoichi Ishikawa, Jiro Shimizu
著者情報
-
Shoichi Ishikawa
Tokyo Institute of Technology
-
Jiro Shimizu
Tokyo Institute of Technology
ジャーナル
フリー
1960 年 6 巻 1 号 p. 31-34
詳細
- Published: 1960 Received: - Available on J-STAGE: 2008/07/08 Accepted: - Advance online publication: - Revised: -
-
訂正情報
訂正日: 2008/07/08 訂正理由: - 訂正箇所: 論文抄録 訂正内容: Wrong : This article inquires theoretically into the transfer function of the servo draft system and into the influence of fiber length on draft control.
Figure 1 illustrates the existing model roller system. Its differential equation is given by formula (1).
The transfer function of the servo draft system is obtainable thus:
ΔN1(s)=1/D(1-sT2/1-sT1)ΔN2(s)-N1/v1(1/1+sT1)ΔU1(s)
This article discusses, with the use of Bode diagrams (Figs. 5, 6, 7, 8 and 9), the influence of fiber length on ΔN2(s) and ΔU1(s).
Right : This article inquires theoretically into the transfer function of the servo draft system and into the influence of fiber length on draft control.
Figure 1 illustrates the existing model roller system. Its differential equation is given by formula (1).
The transfer function of the servo draft system is obtainable thus:
ΔN1(s)=1/D(1-sT2/1-sT1)ΔN2(s)-N1/v1(1/1+sT1)ΔU1(s)
This article discusses, with the use of Bode diagrams (Figs. 5, 6, 7, 8 and 9), the influence of fiber length on ΔN2(s) and ΔU1(s).
訂正日: 2008/07/08 訂正理由: - 訂正箇所: PDFファイル 訂正内容: -
PDFをダウンロード (291K)
メタデータをダウンロード
RIS形式
BIB TEX形式
テキスト
メタデータのダウンロード方法
発行機関連絡先
(EndNote、Reference Manager、ProCite、RefWorksとの互換性あり)
(BibDesk、LaTeXとの互換性あり)
