Journal of Thermal Science and Technology
Online ISSN : 1880-5566
ISSN-L : 1880-5566
Papers
A Study on the Optimal Injection Conditions for an HC-LNT Catalyst System with a 12-Hole Type Injector
Jungmo OHKihyung LEEJinha LEE
著者情報
ジャーナル フリー

2008 年 3 巻 2 号 p. 278-291

詳細
抄録
NOx catalytic converter systems periodically require rich or stoichiometric operating conditions to reduce NOx. The HC (hydrocarbon) concentration in a diesel engine is typically so low that the HC is not sufficient for NOx conversion. It was proposed that a rich air fuel ratio in a diesel engine could be realized via post fuel injection or supplemental fuel injection into the exhaust gas. A new method that optimizes the control of an external HC injection to diesel exhaust pipes for HC type LNT (Lean NOx Trap) catalyst systems has been developed. The external injection has other benefits: it can be controlled independently without disturbing engine control, it can be adapted to various layouts for exhaust systems, it has no oil dilution problems, among other benefits. In this study, the concentration and amount of HC can be controlled via control of the external injection. This research investigated the spray behavior of hydrocarbons injected into the transparent exhaust pipe. From this experiment, we obtained useful information about the optimal injection conditions for the HC-LNT catalyst system with an MPI injector.
著者関連情報
© 2008 by The Japan Society of Mechanical Engineers and The Heat Transfer Society of Japan
前の記事 次の記事
feedback
Top