Distinction between Thermal and Stress-Induced Martensitic Transformations and Inhomogeneity in Internal Stress

抄録

A concept of inhomogeneous internal stress called shape change stress (SCS) was introduced in martensitic transformations (MTs). The SCS was considered to be required because martensite plates formed on cooling must deform the surrounding untransformed parent. The concept enabled successful elucidation of the reason for the progress of thermally induced MTs (TIMTs) with changing temperature and for that of stress-induced MTs (SIMTs) under constant stress on the basis of the Gibbs phase rule. Decreasing SCS with decreasing specimen size (mass) explained the downward shifts of experimental equilibrium temperatures T_o^∗=(M_s+A_f)⁄2 with decreasing specimen mass m so far observed in the TIMTs of some shape memory alloys. Furthermore, the concept that no SCS is generated either in SIMTs or at the ultimate end of m=0 in TIMTs rationalized the following observation on a monocrystalline Cu–13.4Al–4.2Ni (mass%) alloy. That is, the variations of M_s and M_f with m converged at the extrapolation to m=0, and those of A_s and A_f also did; M_s^#=M_f^# and A_s^#=A_f^# (the superscript # indicates the transformation temperatures at the ultimate end of m=0). The former coincided with T^L(0) where the dependence of transformation stress σ^L on temperature was extrapolated to stress zero, and the latter coincided with T^U(0) where a similar extrapolation in the case of reverse transformation stress σ^U was performed.