2004 年 45 巻 2 号 p. 288-291
As the automotive industry trends towards increased use of aluminum, the friction stir welding process offers many potential benefits for joining of aluminum. In this study, the microstructure in friction stir welded 6061 aluminum alloy was observed by metallographic technique, electron backscatter diffraction pattern (EBSD) and optical microscopy. The microstructure in the heat affected zone (HAZ) was significantly different from that in a thermo-mechanically affected zone (TMAZ). EBSD indicated that many more low-angle grain boundaries in TMAZ, i.e., subgrains with a recovered granular structure, were observed than in HAZ. Friction heating and plastic flow during friction stir welding created fine recrystallized grains and recovered grains in the TMAZ. The friction stir welding process produced a softened region in the 6061 Al welded alloy. In the stir zone, equiaxed grains were created and the grain size was smallest in the bottom area.
