MATERIALS TRANSACTIONS
Online ISSN : 1347-5320
Print ISSN : 1345-9678
ISSN-L : 1345-9678
High Pressure Acid Leaching of Co Matte Converted from Co Concentrate
Gunha KimGa-hee KangSangjun KimSookyung KimJeongsoo SohnKyungjung Kwon
著者情報
ジャーナル フリー HTML

2016 年 57 巻 10 号 p. 1753-1758

詳細
抄録

Cobalt concentrates are often leached with an acid such as sulfuric acid. An alternative leaching process of using matte is suggested. Cobalt concentrates are first converted to matte, enriching their major elements of Co, Cu and Fe, and the matte is treated by sulfuric acid pressurized leaching. The Co concentrate includes Co oxides as valuable minerals, whereas Co, Cu and Fe exist predominantly as sulfides in the matte. The effect of experimental factors such as oxygen partial pressure, sulfuric acid concentration and sulfur content in the matte on the leaching efficiency of Co is investigated. The presence of oxygen as an oxidizing agent improves the leaching efficiency of Co. Sulfuric acid concentration of 0.19 M is sufficient for the full dissolution of Co from the matte in oxygen atmosphere. A higher sulfur content in the matte enhances leaching rate of matte slightly. The leaching results are well matched with physicochemical characterization of Co concentrate, matte and residues. This alternative leaching process using Co matte could lead to a higher Co leaching efficiency than the direct leaching process using Co concentrate.

Fig. 8 Leaching efficiency of Co concentrate and matte 1 (20 atm PO2, 0.19 M H2SO4, 150℃ and 2 h). Fullsize Image
著者関連情報
© 2016 The Japan Institute of Metals and Materials
前の記事 次の記事
feedback
Top