High Pressure Tube Twisting for Producing Ultra Fine Grained Materials: A Review

Laszlo S. Toth; Cai Chen; Arnaud Pougis; Mandana Arzaghi; Jean-Jacques Fundenberger; Roxane Massion; Satyam Suwas

doi:10.2320/matertrans.MF201910

Laszlo S. Toth, Cai Chen, Arnaud Pougis, Mandana Arzaghi, Jean-Jacques Fundenberger, Roxane Massion, Satyam Suwas

著者情報

Laszlo S. Toth
Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux (LEM3), UMR 7239, CNRS/Université de Lorraine
Laboratory of Excellence on Design of Alloy Metals for low-mAss Structures (DAMAS), Université de Lorraine
Cai Chen
Sino-French Engineering School, Nanjing University of Science and Technology
Arnaud Pougis
Safran Aircraft Engines, Rond Point René Ravaud
Mandana Arzaghi
ISAE-ENSMA, PPRIME UPR CNRS 3346
Jean-Jacques Fundenberger
Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux (LEM3), UMR 7239, CNRS/Université de Lorraine
Laboratory of Excellence on Design of Alloy Metals for low-mAss Structures (DAMAS), Université de Lorraine
Roxane Massion
Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux (LEM3), UMR 7239, CNRS/Université de Lorraine
Laboratory of Excellence on Design of Alloy Metals for low-mAss Structures (DAMAS), Université de Lorraine
Satyam Suwas
Department of Materials Engineering Indian Institute of Science

キーワード: high pressure tube twisting (HPTT), tube-high pressure shearing (t-HPS), severe plastic deformation (SPD), microstructure, texture, Al, Mg, Cu, IF steel

ジャーナルフリー HTML

2019 年 60 巻 7 号 p. 1177-1191

DOI https://doi.org/10.2320/matertrans.MF201910

詳細

抄録

The High Pressure Tube Twisting (HPTT) process was first proposed in 2009 as an efficient new Severe Plastic Deformation (SPD) process. Since then it has been successfully applied on many different materials and the results have been reported in several publications and thesis works. The purpose of this overview is to present and evaluate the main results of the published papers and thesis works and also to present new contributions. Special attention is given to the strain gradient which appears in the tube wall for which a new empirical formula is presented.

Fullsize Image

責任著者(Corresponding author)

J-STAGEへの登録はこちら（無料）