MATERIALS TRANSACTIONS
Online ISSN : 1347-5320
Print ISSN : 1345-9678
ISSN-L : 1345-9678
Materials Processing
Effect of Amount of Fuel for Punchability in Punchless Impact Punching by Compression Ignition
Masahito Katoh
著者情報
ジャーナル フリー HTML

2021 年 62 巻 9 号 p. 1386-1392

詳細
抄録

In this study, punchless punching by the compression ignition of octane and the effect of varying the amount of fuel on punchability were investigated. In the experiment, the compression in compression ignition was applied using a drop hammer. As the amount of fuel increased, the variation in the initial height of the hammer required for completing the piercing could be divided into the following four parts of the basis on the amount of fuel. In the first part, corresponding to the smallest amount of fuel, the height exhibited a large decrease. In the second part, the height decreased by a small amount. In the third part, the height increased. Finally, in the fourth part, corresponding to the largest amount of fuel, the height remained constant. The four parts were believed to be caused by differences in the chemical reactions. Moreover, the optimum amount of fuel for punching was the largest amount of fuel under the conditions of the first part.

 

This Paper was Originally Published in Japanese in J. JSTP 61 (2020) 93–98.

著者関連情報
© 2021 The Japan Society for Technology of Plasticity
前の記事 次の記事
feedback
Top