Suppression of Hydrogen Embrittlement due to Local Partitioning of Hydrogen to Dispersed Intermetallic Compound Particles in Al–Zn–Mg–Cu Alloys

抄録

Recent studies have revealed that hydrogen embrittlement in Al–Zn–Mg alloys appears to be dominated by hydrogen partitioning to MgZn₂ precipitates. A method has recently been proposed for reducing the hydrogen concentration at MgZn₂ precipitates by adding specific intermetallic compound particles that have high hydrogen trap energy. In the present study, the effectiveness of Al₇Cu₂Fe particles on suppression of hydrogen embrittlement in Al–Zn–Mg–Cu alloys was evaluated using X-ray microtomography. Quasi-cleavage cracks were found to be initiated in regions where local volume fractions of the Al₇Cu₂Fe particles were relatively low. Hydrogen partitioning to the MgZn₂ precipitate interface was suppressed, even in high hydrogen concentration material, by adding Al₇Cu₂Fe particles. However, the fractional area of the quasi-cleavage fracture in the material with high hydrogen concentration was higher due to insufficient hydrogen diffusion inside the Al₇Cu₂Fe particles and at the interface between the aluminum matrix and the particles. It appears that finely distributed small Al₇Cu₂Fe particles might effectively suppress hydrogen embrittlement.