MATERIALS TRANSACTIONS
Online ISSN : 1347-5320
Print ISSN : 1345-9678
ISSN-L : 1345-9678

この記事には本公開記事があります。本公開記事を参照してください。
引用する場合も本公開記事を引用してください。

Improvement of Bending Modulus and Impact Value in Injection-Molded Short Carbon Fiber Reinforced Polyetheretherketone with Homogeneous Low-Voltage Electron Beam Irradiation
Yoshitake NishiRéda OurahmouneMasae KandaJunhua QuanMichael C. FaudreeMichelle Salvia
著者情報
ジャーナル フリー 早期公開

論文ID: M2013455

この記事には本公開記事があります。
詳細
抄録
In short carbon fiber reinforced polyetheretherketone (SCFRP-PEEK) composites, carbon fibers and PEEK matrix typically exhibit a weak adhesive force at the interface. However, applying 0.43 MGy dose of homogeneous low-voltage electron beam irradiation (HLEBI) was apparently shown to improve not only the bending modulus (Ef) 65.5% at the median-ranked cumulative probability evaluated as a distribution function (PE = 0.50) from 6.7 to 11.1 GPa, but also Charpy impact fracture value (auc) 17.5% at median-ranked cumulative probability (Pf = 0.50) from 16.6 to 19.5 kJ m−2. The 0.43 MGy HLEBI dose also remarkably improved the statistically lowest Charpy impact value as at Pf = 0 calculated by 3-parameter Weibull equation 80.0% from 8.0 to 14.4 kJ m−2. Penetration depth, Dp of the HLEBI was calculated to be 153 to 226 µm (3–11%) into both side surfaces. SEM results of the HLEBI-treated Charpy impact sample fracture surfaces show more matrix sticking to the fibers and more matrix being held between fibers than the untreated increasing pullout resistance. The HLEBI appears to assist in strengthening the typically weak bonding between the carbon fiber and PEEK matrix improving mechanical properties.
著者関連情報
© 2014 The Japan Institute of Metals and Materials
feedback
Top