論文ID: MT-E2024001
The influence of sample geometry on various measured physical properties (including the magneto-Seebeck effect, Nernst effect, magnetoresistance effect, Hall effect, and thermal conductivity) in the presence of a magnetic field was examined using a polycrystalline Bi-Sb sample. The sample, consisting of polycrystalline Bi88Sb12, was prepared through spark plasma sintering and subsequent annealing. Measurements of the physical properties were conducted under a magnetic field of 5 T, and the obtained values were compared with simulated results derived using the finite element method for different sample geometries. Distinct shapes were found to be necessary for accurate measurements, with each physical property requiring a specific aspect ratio of sample length (l) to width (w). These ratios were determined to be l/w > 0.57, 2.9, 4.2, 1.2, and 3.1 for the magnetoresistance, Hall, two-wire magneto-Seebeck, four-wire magneto-Seebeck, and Nernst effects, respectively. Additionally, to achieve a minimal error of less than 2% in thermal conductivity measurement, a thermal conductance ratio of Ks/Kw > 27 was necessary, where Ks and Kw denote the thermal conductance of the sample and lead wire, respectively.
