論文ID: MT-M2023055
The validity of the Tsai-Hill criterion for a porous aluminum alloy with regularly aligned unidirectional pores was investigated experimentally and numerically. The Tsai-Hill criterion predicts failure in different directions in anisotropic composite material. Compression tests of porous aluminum alloy were performed with five different compression angles of 0, 30, 45, 60, and 90°. The compression angle is the angle between the loading direction and the longitudinal direction of the pore. A numerical analysis of a torsion test of the porous aluminum alloy was also performed to obtain shear strength. Compressive yield strength and equivalent shear strength of the specimen with 0 and 90° in compression angle were utilized in the Tsai-Hill criterion. As a result, the yield strength of the specimen with 30, 45, and 60° in compression angle was successfully predicted with a maximum relative error of 4%. The applicable strain range of the Tsai-Hill criterion was also investigated by altering the yield strength to various offset strengths. The resulted prediction showed a maximum relative error of 10% when the offset strain was 40% or less. Above that offset strain, densification of the porous structure caused a rapid increase in stress, leading to a drastic decrease in prediction accuracy.
