MEMBRANE
Online ISSN : 1884-6440
Print ISSN : 0385-1036
ISSN-L : 0385-1036
Review Article
Development of Advanced Reforming System for 2 Station Using CO Converter Equipped with CO2 Selective Membrane
Osamu Okada
Author information
JOURNAL OPEN ACCESS

2012 Volume 37 Issue 2 Pages 80-86

Details
Abstract
In this study, we developed a novel membrane reactor consisted of CO shift catalysts and a membrane for CO2 separation. First, we developed facilitated transport membranes for CO2 separation. We tested several carriers to achieve high CO2 permeance (1 × 10-4 mol /m2 s kPa) and high CO2/H2 selectivity (100). We successfully achieved the target values even at the elevated temperature (160 °C). In addition, the developed membrane had good stability. It was confirmed that high performance was maintained stably for 400 hours at 160 °C. Secondly, we developed CO shift catalysts, which have high activity for the CO shift reaction at low temperature region. As a result, we succeeded in the development of both precious metal-based catalysts, and Cu-based catalysts. Thirdly, a membrane reactor could be fabricated by combining the developed CO2 selective membranes and CO shift catalysts. Observed CO and CO2 concentrations at the feed-side exit of the membrane reactor were lower than 10 ppm and 1%, respectively. Using membrane reactor it is possible to reduce both CO and CO2 to lower than equilibrium level. Finally, we performed trial design of the total system of a hydrogen station equipped with the developed membrane reactor and evaluated the effect of the membrane reactor on downsizing of the total system and improvement of efficiency. kn-abstract=
Content from these authors
© 2012 The Membrane Society of Japan
Previous article Next article
feedback
Top